Solar Panel
Install and position the LaView Solar Panel for Battery Camera to keep your wire-free N3 camera continuously powered.
This Installation Guide for the Solar Panel for Battery Camera walks you through unboxing the parts, mounting the solar panel, positioning it for maximum sunlight, and connecting it to a wire-free camera.

In the Box
- Solar Panel ×1
- Universal Joint ×1
- Bracket ×1
- Positioning Sticker ×1
- Screws ×4
- Wall Anchors ×3
- Solar Panel Installation Guide ×1

Installation
Place solar panel in an area with consistent sunlight throughout the year. It only needs a few hours of direct sunlight each day to keep your camera powered.
The amount of energy that the solar panel produces is affected by weather conditions, seasonal changes, geographic location, etc.
Screw the universal joint into the bracket.

Stick the positioning sticker at the target location.
Note
The solar panel power cord is 2 meters long. Please install the solar panel within a 2-meter range of the camera installation location. Please place the solar panel in a position with optimal sunlight absorption.

Install plastic anchors at designated installation locations.

Align the mounting bracket's holes with the target position and secure the bracket by screwing in the screws.

Screw the universal joint into the back of the solar panel. Tighten it firmly with the attached nut.

Adjust the orientation of the panel by turning the handle to get maximum sunlight energy.

Connect the panel to a wire-free camera with a power cord.


How to Position Your Solar Panel
- Find the area that gets the most direct sunlight throughout the day.
- Angle the solar panel upward 30°.
- Point it south if in the northen hemisphere and north if in the southern hemisphere.
Important
- Wipe the face of the solar panel with a soft, damp cloth regularly to clear any dust or debris.
- Be sure to update the firmware version of the camera to the latest version.
Basic Parameters
- Cable length: 2m
- Operating voltage: 5V DC
- Operating temperature: -20℃ to 55℃ (-4℉ to 131℉)
FCC Warning
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
ISEDC RSS Warning
This device compiles with ISEDC licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Related
User Manual
Full user manual for the LaView N3 Wi-Fi Battery Camera: what's in the box, product layout, charging, app setup, adding the camera, installation, Live View controls, and safety information.
R12 User Manual
Set up the LaView R12 Pan-Tilt Security Camera: app setup and pairing, installation, troubleshooting, motion detection, night vision, and specifications.
LaView camera App Docs